When the opener stops working, the problem is often simple. Before you call for service, go through these quick checks. If none of them fix it, the issue is likely inside the opener or with the door itself.
Quick checks you can do safely
- Power: make sure the opener is plugged in and the outlet works. Check the breaker or GFCI outlet in the garage.
- Remote batteries: replace the batteries and try the wall button. If the wall button works, the remote is the problem.
- Lock mode: many wall panels have a lock or vacation button that disables remotes.
- Safety sensors: the two sensors near the floor must face each other with steady lights. Clean the lenses and remove anything blocking the beam.
- Manual release: if the red cord was pulled, the trolley is disconnected. Reconnect it by running the opener once.
- Obstructions: look for anything in the track or under the door.
- Light blinking: a blinking opener light usually points to a sensor or force setting problem.
Signs it needs a professional
- The motor hums but the door does not move.
- You heard a loud bang before it stopped. A spring may be broken.
- The door starts, then reverses for no reason.
- Grinding or clicking from the opener unit.
- The door is crooked or off track.
If the motor runs but the door will not lift, stop pressing the button. A broken spring makes the door too heavy, and the opener can be damaged trying to lift it. See signs of a broken spring.
Opener repair near you
We repair and replace openers across the Houston area. See our garage door opener repair service, or our local pages for Katy, Pearland and Cypress. Call (832) 569-9692.